Specifications

Understanding SCSI Connections Page 14
Changing the SCSI ID Number in Windows 98
If you are using your scanner with Windows 98 and you want to change
the scanner’s SCSI ID number, follow the steps below.
1 Double-click the Scanners and Cameras icon in the Control
Panel.
2 Select your scanner in the installed devices list, then click Remove.
3 Click OK and close the dialog box.
4 Shut down Windows 98 and turn off your PC and scanner.
5 Change the SCSI ID number of the scanner.
6 Turn on your scanner, and then turn on your PC.
7 Follow the instructions on the screen.
ref.book Page 14 Monday, September 28, 1998 4:24 PM