Quick Start Guide

37
YOU WANT TO CREATE A GALLERY OF “ANTIQUE” PHOTOGRAPHS
You can use Adobe PhotoDeluxe to turn photographs you snapped yesterday
into instant antiques.
1. Start PhotoDeluxe.
2. Place your photograph face-down on the scanner’s document table.
3. Select your scanner software.
From PhotoDeluxe 2.0, click Get Photo and choose the Get Photo tab.
Click the bottom half of the Scanners button and select Perfection 600
(32 Bit)
as your input source.
From PhotoDeluxe 1.1, choose Acquire from the File menu, then choose
Select TWAIN Source. Highlight EPSON Perfection 600 and click
Select.
Note:
◗ If you have a Macintosh, choose Acquire from the File menu, then choose
Perfection600.
4. Open the scanner software. (If you have a Macintosh, skip this step.)
From PhotoDeluxe 2.0, click the top half of
the Scanners button from the Get Photo tab.
From PhotoDeluxe 1.1, choose Acquire from
the File menu, then choose TWAIN.
You see the EPSON Perfection 600 main
window.
5. Follow the instructions under “Completing
Your Scan” on page 24 to scan the
photograph.
When you’ve finished scanning, your photo is
automatically loaded into PhotoDeluxe.
6. Follow the instructions in your PhotoDeluxe
online user’s guide for adding old-fashioned
special effects to your photographs.
Mint SG 10/27/97, 12:44 PM41