Quick Start Guide

1. Start the host application (for

example, Visioneer PaperPort).

2. Select your scanner software.

(Unless you change your source, you

only need to do this step once.)

For example, from PaperPort choose

Select Source from the File menu.

Highlight Perfection 600 (32 Bit)

from the Select Source list and click

Select.

If you’re running Windows 3.1,

select EPSON Perfection 600 as

your source.

If you have a Macintosh, choose Select Source from PaperPort’s File menu.

Make sure the Perfection600 icon is highlighted, then click OK. Only use

this icon with PaperPort.

Note:

If you’re running any application but PaperPort on your Macintosh, choose Acquire

from the host application’s File menu, then select Perfection600 from the cascading

menu. If you don’t see Perfection600 in the

menu, make sure you copied the

Perfection600 plug-in module from the

EPSON Perfection 600 folder to the plug-ins

folder for your application. (You don’t need

to copy this module to PaperPort’s Plug-ins

folder.) The scanner software automatically

opens, so you can skip step 3.

3. Open the scanner software.

For example, choose Acquire from

PaperPort’s File menu, or click the

Scan button on the PaperPort

toolbar.

The EPSON Perfection 600 main

window appears.

Mint SG 10/27/97, 11:42 AM27