Quick Start Guide

INSTALL THE OPTIONAL TRANSPARENCY UNIT

Caution:

Before you begin, make sure the scanner is turned off and the

scanner’s power cord is disconnected.

1. If you haven’t already removed the document cover from the

scanner, do so now.

Follow the instructions

on page 9.

2. Make sure the optical

assembly on the

transparency unit is

unlocked. (Push down to

move the slider to the

unlock symbol.) The

optical assembly should be

in the home position.

home position

locked

unlocked

2. Click the Test button. The Test Scan dialog box appears.

Note:

The default scan method is Reflective. If you have an optional

transparency unit attached to the scanner, you can test its

operation.

3. Click the Scan button.

When the test is complete, you’ll either see a message saying the

scan was successful, or you’ll see an error message. If you see an

error message, go to “Problems? Need Help?” on page 39.

slider

Mint SG 10/27/97, 11:42 AM22