Quick Start Guide

INSTALL THE EPSON SCANNER DRIVER AND SOFTWARE

APPLICATIONS

The Windows 95 and Windows NT 4.0 software are combined on one

CD-ROM. Windows 3.1 and Macintosh software are on separate CD-ROMs.

The application software bundled with your scanner varies depending on the

operating system. You can view the manuals that come with your software by

clicking the View Manuals button at the bottom of the installer screen.

Note:

Adobe Acrobat Reader must be installed before you can view a manual. Acrobat

Reader is bundled with your scanner software.

Before you begin, make sure your SCSI board and SCSI driver are installed, and

your scanner is attached to the computer and turned on. Also, check the CD

label to make sure you have the correct CD-ROM for your operating system.

If you’re running Windows 95 or Windows NT 4.0…

Follow these steps to install the software:

1. Start Windows and then insert the EPSON Perfection 600 CD-ROM for

Windows 95 and Windows NT into your drive. The installer screen

appears.

Note:

If the screen doesn’t appear, click Start and Run. At the prompt, type D:\setup. (if your

CD-ROM drive uses a different drive letter, use it instead); then click OK.

Windows 95

Windows NT

Mint SG 10/27/97, 12:25 PM17