User`s manual

Appendix C: The Front Panel
76 AXIS AX-7 Cobra+ User’s Manual
0
9
8
7
6
5
4
3
2
1
The Rotary Switch
The ten-position rotary switch is used to set start conditions for the
AX-7 Cobra+. It is also used to select and execute test functions during
operation.
Start Conditions
The action when the AX-7 Cobra+ is switched on will be determined
by the setting of the rotary switch, as follows:
Note:
❏ If a terminal is connected the terminal set-up routine is started
automatically, see page 14.
Pos. Description
0 Normal print operation. *
1-7 Reserved.
8-9 Perform a test printout, then start normal print operation.