User`s manual

Appendix C: The Front Panel
AXIS AX-7 Cobra+ User’s Manual 75
0
9
8
7
6
5
4
3
2
1
Appendix C The Front Panel
The front panel has three indicators (POWER, SYSTEM and PC
SHARE) and a rotary switch. The switch is used for accessing certain
functions. In normal print operation it should be set to ‘0‘.
The POWER indicator
This indicator (green) is lit when the AX-7
Cobra+ is switched on.
This indicator (green) is lit when the AX-7
Cobra+ is connected to your IBM system. It
can also flash under the following conditions:
• Flash during six seconds at power up.
• Flash in Test Mode (see below).
• Rapid flash during test function execution.
Note:
❏ If the power up flashing continues, a hardware error has occurred.
Contact your dealer/ distributor.
The PC SHARE indicator
This indicator (yellow) is lit during a PC printout. Any print job from
host will be put on wait during the PC printout and for a subsequent
delay time set by parameter PC-Host Timeout (#136).
POWER
SYSTEM
PC SHARE
9 Vac in
0
9
8
7
6
5
4
3
2
1
The SYSTEM indicator