User`s manual

Appendix A: The Parameter List
AXIS AX-7 Cobra+ User’s Manual 71
#139 End of Job Time-out
A timer controlling parameters #140 and #151 when the host has been
idle for the specified amount of time.
#140 End of Job Sequence
This string is sent when the End of Job timeout has expired.
#141 Host-PC Parallel Sequence
This string precedes the first parallel PC printout following a host
buffer or a serial PC printout.
#142 GDDM Support
Selects the graphics driver used for GDDM (Programmable Symbols)
graphics.
#143 GDDM Color
Selects Color/Monochrome GDDM graphics.
Value Description Value Description
1-255 Time-out in seconds 60 Take action after 1 min. idle
*0 Do not take action on idle
(default)
255 Take action after 4:15 min. idle
10 Take action after 10 sec. idle - -
Value Description Value Description
<any
seq.>
(any length or content)
*<empty>
(default)
Value Description Value Description
<any
Seq>
(length and contents free of
choice)
*<empty>
(default)
Value Description Value Description
*0 Off
(default)
3HP LaserJet
1 Fujitsu DPL24C 4 HP LaserJet 2/3 size
2 Epson/Proprinter - -
Value Description Value Description
*0 Monochrome
(default)
2 Seven colors
1 Four colors