User`s manual

Appendix A: The Parameter List
AXIS AX-7 Cobra+ User’s Manual 67
#066 Option Select 2
This parameter controls 8 independent switches. Each bit represents
one switch.
Bit 0 ($01): Extended Emulation Control Syntax.
Bit 1 ($02): True Screen Image in Host Direct Mode.
Bit 2 ($04): Next print position after New Line at MPP+1.
Bit 3 ($08): Lock MPP.
Bit 4 ($10): Suppress New Line after Extended Emulation Sequence.
Bit 5 ($20): CR and Space Character Buffering.
Bit 6 - 7 ($40 - $80): Reserved
Value Description Value Description
$00-$FF (valid range) *$10 (default)
Value Description Value Description
*0 Normal syntax
(default)
1 Only Escape Character after
‘&&??’
Value Description Value Description
*0 True Screen Image valid for all
Hardcopy modes
(default)
1 Suppress NULs in Host Direct
Mode
Value Description Value Description
*0 1st print position of current + 2
lines
(default)
1 1st print position of current + 1
line
Value Description Value Description
*0 No
(default)
1Yes
Value Description Value Description
0 Yes *1 No
(default)
Value Description Value Description
*0 Yes
(default)
1No