User`s manual

Section 4: Advanced Functions
46 AXIS AX-7 Cobra+ User’s Manual
Bar Codes
This function gives you easy access to a range of standard bar code
types. You can design every single bar code printout to meet your
specific requirements, such as width and height.
There are two functions and two parameters that are used for printing
bar codes:
• Function ‘211’ defines the bar code.
• Function ‘212’ prints the bar code.
• Bar Code Driver (#093).
• Bar Code Attributes (#094).
The definition has to be done before a bar code can be printed.
See page 62 for a description of parameters.
Define Bar Codes
The function ‘211’, which is to be inserted into a document, has the
following syntax:
211,value 1,value 2,value 3,value 4,value 5
The function number is followed by five bar code specification values.
All five values must be specified:
Value 1: Bar Code Type. Selectable values (in decimal):
1=Code 39
3=UPC-A
8=EAN8
9=EAN13
12 =2 of 5 Interleaved
13 =Codabar Matrix
17 =Code 128
Value 2: Module Width as a multiple of 1/120 inch.
The value may range from 1 to 32 (in decimal).