User`s manual

Section 2: Basic Installation
AXIS AX-7 Cobra+ User’s Manual 11
The AX-7 Cobra+ will produce a test printout on the printer which
shows the firmware revision and basic configuration. The default
configuration is for a generic printer.
Example:
The Generic Printer configuration will support limited printer
operation. To get more out of your printer, it is advised to configure
the AX-7 Cobra+ for your printer type. Please refer to page 16 before
continuing with System Attachment.
The test printout will show if the AX-7 Cobra+ has been configured
for your printer by the dealer/distributor.
Example:
The printout shows that this AX-7 Cobra+ has already been
configured for an HP LaserJet III printer:
******** TEST PRINTOUT ********
AX-7 Cobra+ Ver 5.41 960311
Printer Driver #30 Generic Printer
#045 IBM Printer Emulation____ 87: IBM 3287
#005 System Language__________ 0: 037 English (US)
#063 ASCII Char. Set__________ 0: US English
#001 Form Length______________ 72
#002 Line Density_____________ 6
#004 Char. Density____________ 10
******** TEST PRINTOUT ********
AX-7 Cobra+ Ver 5.41 960311
Printer Driver #49 HP Laserjet III
#045 IBM Printer Emulation____ 87: IBM 3287
#005 System Language__________ 0: 037 English (US)
#063 ASCII Char. Set__________ 13: PC 850
#001 Form Length______________ 66
#002 Line Density_____________ 6
#004 Char. Density____________ 10