Datasheet

output and made sure you can playback it on the chosen device you can convert the whole movie with the same settings or change

the settings if you see something wrong. Partial conversion is also useful when you want to cut the scenes from the movie or select

only a part of a movie, for instance a music video clip.

Use the mouse cursor on the slider to select a part of the video to be converted. Select the beginning of the video with the mouse

cursor (it will turn into a double sided arrow), click it and, without releasing, drag to the place where you want the episode of your

video to begin. The same way the episode end is selected:

You can also use the buttons to make a selection:

[F5]

Use the Set Selection Start from Cursor Position button to set the

initial point of your selection to the current slider cursor position.

[F6]

Use the Set Selection End to Cursor Position button to set the final

point of your selection to the current slider cursor position.

[F3]

Use the Show Selection Start button to show the video that corresponds

to the selection initial point.

[F4]

Use the Show Selection End button to show the video that corresponds

to the selection final point.

Use the Play Selection button to playback the video in the selection

range.

Use the Select All button in case you selected some part of your video and

after that decided to convert the whole video.

When you are ready to proceed to the next step press the Next>> button to go to Step two.

Step 2: Output File Format

When you get to Step two there are two ways to continue the conversion process:

1. If you know what type of device you are going to convert video for and do not want to change any specific settings then stay

in Simple mode.

2. If you would like to customize some settings or to experiment with advanced output file and codec features then press the

Switch to custom mode button to go to Custom mode.

AVS4YOU Programs Help - AVS Video to GO

Page 8 of 34