Datasheet

Once the video is loaded you will be able to see information on its main parameters:

Press Audio track to select audio language (there can be several audio tracks in one DVD, you should select the one you want).

Once the source file path is entered you will see the file information:

Video parameters:

Size - the number of pixels that form the video image (horizontally/vertically).

Frame rate - the number of video frames displayed every second.

Duration - length of the movie (hours:minutes:seconds).

Audio parameters:

Bit rate - the number of data points used to approximate the true wave form (kilobits per second).

Channels - number of channels in the audio track (mono - one channel, stereo - two channels, quadro - four

channels, 4.1 - five channels, 5.1 - six channels, 6.1 - seven channels, 7.1 - eight channels).

Frequency - sampling frequency specified in hertz.

Duration - length of the movie soundtrack (hours:minutes:seconds).

Use the Play button to play the source video file to preview it.

Use the Pause button to pause the source video file while previewing it.

Use the Slider to find a specific place in the movie while previewing it.

If you are sure that you want to convert the entire DVD movie or video file then simply press Next>> to go to Step two.

You can also select to convert a part of the video only if you need to. Usually it is better to try and see the result of so to speak "test

conversion": when you choose a small part of a movie and convert it into the selected format. After that if you are satisfied with the

AVS4YOU Programs Help - AVS Video to GO

Page 7 of 34