Datasheet

Step 2 - Custom Mode

If you are going to change some settings of the future output file or of the codec used to convert the video files you should press the

Switch to custom mode button thus going to custom mode:

It is possible to return to simple mode whenever you want simply pressing the Switch to simple mode button.

Here you can change any output file settings you like:

File Parameters

Video preset

Preset parameters fitted for the specific device you have (see the Advanced Settings section to find out what

kind of playback devices are supported by the AVS Video to GO).

File type Type of the output file that depends on the playback device (can be selected from the list).

Number of

files

Number of the output files (can be one or two).

Size Output file size specified in megabytes (can be entered manually or changed using the up and down arrows).

Output Video Parameters

Format Format of the output file (MPEG-4, MPEG-4 DivX, MPEG-4 Xvid, H.264 or WMV).

Encoding Number of passes to perform the encoding (single or two pass).

Bit rate The number of bits transferred per second (can be entered manually or changed using the up and down arrows).

Frame rate The number of video frames displayed every second (can be selected from the list).

Frame size The number of pixels that form the video image (horizontally/vertically) - can be selected from the list.

AVS4YOU Programs Help - AVS Video to GO

Page 12 of 34