User`s guide

Displaying and Adjusting the Image 47
Resizing Video Images
You can resize your images by changing the aspect (width to height)
ratio (depending on your input signal).
On the EX70, you can press the
Aspect button on the remote
control. Press the
Aspect button repeatedly to cycle through the
available options.
On the EX30 or EX50, you can select the
Aspect setting only from
the projector’s Signal menu. See page 63 for instructions.
Select from one of these
Aspect options:
EX30 or EX50
■ Normal (for images sent through the Computer (Component
Video)
port only): Displays images using the full projection area
and maintains the aspect ratio of the image. Choose this setting to
automatically resize the image and make the best use of the
display area.
■ 4:3: Displays images using the full projection area at an aspect
ratio of 4:3.
■ 16:9: Converts the aspect ratio of the image to 16:9. 4:3 ratio
images are elongated horizontally to fit.
EX70
■ Auto (HDMI images only): Automatically sets the aspect ratio
according to the input signal. Choose this setting to project an
HDMI image in the best aspect ratio.
note
You cannot change the
aspect ratio when displaying
from a computer using the
USB
TypeB port or from a
USB device or SD card
using the
Slideshow
source.
Aspect
button
EX70