User manual

23
Windows 2000/Me
1 Double-click the [Unplug or
eject hardware] icon in the
task bar notification area.
The [Unplug or Eject Hardware] screen
appears.
2 Confirm that [PENTAX USB
DISK Device] is selected and
click [Stop].
The [Stop a Hardware device] screen
appears.
3 Confirm that [PENTAX USB
DISK Device] is selected and
click [OK].
A message appears.
4 Click [OK].
5 Disconnect the camera from your PC.
Windows 98 / 98SE
Confirm that the Focus status lamp (green) is not blinking before
disconnecting the camera, then simply turn off the camera and
disconnect the USB cable.