User's Guide

39
3. To change any of the print settings
displayed on the screen, press Menu and select your
settings.
4. After you finish selecting your settings, press OK.
5. Press Start to print your photos.
If you need to cancel printing, press Stop/Clear Settings.
Remove Memory Card
Before you remove your memory card or turn off your printer, make sure the memory card access
light is not flashing:
Caution:
Do not remove a card or turn off your printer when the memory card access light is flashing or
you may lose photos on the card.
If your printer is not connected to your computer, pull the memory card straight out of its slot.
If your printer is connected to your computer, do one of the following before removing the
memory card or turning it off:
• Windows:
Click the or icon on the task bar and select Safely remove USB Mass Storage Device.
Once you see a confirmation message, remove the card.
If you installed the NX510 Series on a network, make sure that the memory card light is not
flashing, then remove the card from the slot.
• Macintosh:
Drag the removable disk icon from your desktop into the trash, then remove the card.
Memory card access light