User's Guide

139
Run a Printer Check
A printer check will help you determine if your Epson printer is operating properly.
1. If your computer is connected, disconnect the USB cable.
2. Load plain paper
in the sheet feeder.
3. Press Setup, press or to select Maintenance, select Nozzle Check, press OK, then press
Start.
4. Your Epson printer begins printing the nozzle check pattern.
• If the page prints, your Epson printer is operating. Your problem may be caused by your
computer, cable, software, or setting selections. Check for additional solutions or re-install
your software.
If the pattern on the page has gaps, clean or align the print head.
• If the page does not print, your Epson printer may have a problem. Check for additional
solutions. If they don’t work, contact Epson.
Problems and Solutions
Check these sections for solutions to problems you may have using your Epson printer:
Setup Problems
Copying Problems
Paper Problems
Memory Card Problems
Problems Printing From a Computer
Problems Scanning From a Computer
Page Layout and Content Problems
The printer’s ink pads are
nearing the end of their
service life. Contact
Epson Support.
Parts inside your Epson printer are at the end of their service life.
Contact Epson for help.
The printer’s ink pads are
at the end of their service
life. Contact Epson
Support.
Cannot recognize the
memory card or disk.
The memory card is not inserted correctly or there is a problem
with the card. Remove it and check the card. Make sure the card is
compatible with your Epson printer.
LCD display screen
message
Problem and solution