User's Guide

128
10. Once you replace all the necessary cartridges, close the cartridge cover and push it down until
it clicks into place.
11. Lower the scanner.
12. Press OK to begin charging the ink. This takes about 2 minutes.
When you see a completion message on the LCD display screen, ink charging is finished.
If you continue to see an ink replacement message on the LCD display screen, Press Start
OK and press down all the cartridges securely. Then press OK again.
Note:
If you replaced a cartridge while copying a document or photo, cancel printing and make sure
your original is still placed correctly on the document table. Then copy your original again.
Caution:
Never turn off your Epson printer while ink is charging or you’ll waste ink.
If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as your Epson printer with the label facing upward. Note that
there is a valve in the ink supply port, making covers or plugs unnecessary, but care is needed
to prevent the ink from staining items that the cartridge touches. Do not touch the ink cartridge
ink supply port or surrounding area, and do not store the cartridge upside down.
If you remove a low or expended ink cartridge, you cannot reinstall and use the cartridge.