User's Guide

117
Print From a Connected Camera
If you have a digital camera that supports PictBridge
™
or USB DIRECT-PRINT
™
printing, you
can connect it to your printer and print your photos directly from the camera. Check your camera
manual to see if it is compatible.
Your photos must be JPEG format and sized from 80 × 80 to 9200 × 9200 pixels.
Follow the instructions in these sections to print directly from a digital camera:
Connect the Camera
Print Photos From the Camera
Note:
Epson cannot guarantee the compatibility of any cameras. Some combinations of paper type, size,
and layout may not be supported, depending on your camera and printer settings.
Connect the Camera
Before you connect your camera, make sure your Epson printer is turned on, but not printing.
1. Remove any memory cards from the slots.
2. Connect the USB cable that came with your camera to the USB port on the front of your
Epson printer.
Now you can get ready to print photos from your camera.
Print Photos From the Camera
Once you have connected your camera, you can load paper and print your photos.
1. Load the paper
on which you want to print your photos.
2. Press Setup.
3. Press or to select PictBridge Setup, then press OK.