Service manual

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119

Revision C

DISASSEMBLY/ASSEMBLY Disassembling the Printer Mechanism 97

Confidential

 Install the FFC according to the following procedures.

1. Lead the FFC through the hole of the Holder FFC and

Main Frame.

Figure 4-85. Installing the CR Unit (3)

2. Secure the FFC with rib A and rib B.

Figure 4-86. Installing the CR Unit (4)

Holder FFC

FFC

Hole

Rib B Rib A

3. Fold back the FFC and secure it with rib A again.

Figure 4-87. Installing the CR Unit (5)

4. Fold back only the Head FFC and secure it with rib A again.

5. Connect the FFC to the Main Board (J8, J9).

Figure 4-88. Installing the CR Unit (6)

A D J U S T M E N T

R E Q U I R E D

Whenever the CR Unit is removed/replaced, the required

adjustments must be carried out.

• Chapter 5 “ ADJUSTMENT” (p.110)

Rib A

FFC

Rib A

Head FFC