Service manual

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119

Revision C

DISASSEMBLY/ASSEMBLY Disassembling the Printer Mechanism 77

Confidential

4. Release the two hooks on both sides of the Carriage with a flathead precision

screwdriver or a similar tool, and remove the Holder Contact Assy upward as

shown below.

Figure 4-30. Removing the Printhead (4)

5. Release the hook, and remove the FFC Cover.

Figure 4-31. Removing the Printhead (5)

6. Remove the three screws that secure the Printhead, and lift the Printhead with

longnose pliers.

Figure 4-32. Removing the Printhead (6)

Holder Contact Assy

Hook

C A U T I O N

Be careful not to touch the nozzles with bare hands or damage the

ink supply needles of the Printhead.

FFC Cover

Rib

hook

SCREW P-TIGHT M2.6x8 BIND (4±0.25kgfcm)

Printhead

Head FFC