Service manual

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119 Revision C
DISASSEMBLY/ASSEMBLY Removing the Housing 68
Confidential
4.3.4 Scanner Stand /Cover Wire
 Parts/Components need to be removed in advance:
None
 Removal procedure
 Scanner Stand
1. Open the Scanner Unit.
2. Release the hooks (x2) at the lower part of the Scanner Stand.
3. Release the guide pins (x2) at the upper part of the Scanner Stand, and remove
the Scanner Stand.
Figure 4-9. Removing the Scanner Stand
 Cover Wire
1. Open the Scanner Unit.
2. Release both the hooks in the direction of arrow, and remove the Cover Wire.
Figure 4-10. Removing the Cover Wire
C A U T I O N
Be careful not to lose the Scanner Stand Spring when removing the
Scanner Stand.
Hook
Guide pins
Scanner Stand
Scanner Unit
Scanner Stand Spring
When installing the Scanner Stand, secure the shorter leg of the
Scanner Stand Spring to the groove on the Scanner Unit, and secure
the longer to the hook of the Scanner Stand as shown below.
Figure 4-11. Installing the Scanner Stand
Hook
Cover Wire
Scanner Unit
Scanner Stand
Scanner Stand Spring
Hook
Groove