Service manual

Epson Stylus NX100/105/SX100/105/TX100/101/102/103/105/106/109/ME 300/ME OFFICE 360/NX110/115/SX110/115/TX110/111/112/113/115/117/119 Revision C
PRODUCT DESCRIPTION Control Panel 21
Confidential
1.6 Control Panel
1.6.1 Operation Buttons & LEDs
The following buttons and LEDs are equipped on the control panel.
 Buttons
 LEDs
Figure 1-5. Control Panel (EAI version as a sample)
Table 1-15. NX100 series
Button Function
Power Turns the power ON/OFF.
Stop
Stops printing immediately and ejects the paper.
Cancels the job which is printing/copying at the same time.
Start Photo Adjusts the image size to the paper and starts color photo copying.
Start B&W Starts B&W copying.
Start Color Starts color copying.
Table 1-16. NX110 series
Button Function
Power Turns the power ON/OFF.
Stop
Stops printing immediately and ejects the paper.
Cancels the job which is printing/copying at the same time.
Start Scan Starts scanning.
Copy B&W Starts B&W copying.
Copy Color Starts color copying.
Table 1-17. LEDs
LED Function
Power LED
• Flashes at power ON/OFF.
• Flashes during each sequence is in progress.
• Flashes when a fatal error occurs or maintenance is required.
• Lights in Ready status.
Paper LED Lights or flashes when a paper-related error occurs.
Ink LED Lights or flashes when a ink-related error occurs.
Power
Power LED
Stop
Paper LED
Ink LED
Start Photo
Start B&W
Start Color
Start Scan
NX100 series
NX110 series
Copy B&W
Copy Color