Service manual

45
Switches D-2 to D-4: Code Page or International Character Set
When the EDS switch D-1 is set ON, these switches select the default
character code page as shown below:
Switch D-5: CR Centering
If you set this switch OFF, the carriage moves to the center each time
to feed paper near the perforation. This way, you can get better quality
of printing around the perforations. It is recommended to match the
page length setting to your fanfold paper, otherwise, this function does
not work properly at the perforations.
If you leave this switch ON, the carriage does not move when feeding
paper.
Code Page D-2 D-3 D-4
#437 U.S.A. ON ON ON
#850 Multi-lingual OFF ON ON
#860 Portuguese ON OFF ON
#861 Icelandic OFF OFF ON
#863 Canadian French ON ON OFF
#865 Nordic OFF ON OFF
International character sets differ in their assignment of 14 character
codes in the Italic character set. See the character tables in Chapter 11.
With these switches you can select one of eight character sets as follows:
Country D-2 D-3 D-4
U.S.A. ON ON ON
France OFF ON ON
Germany ON OFF ON
England OFF OFF ON
Denmark I ON ON OFF
Sweden OFF ON OFF
Italy ON OFF OFF
Spain I OFF OFF OFF