Service manual

39
CONDITIONS INDICATED BY BEEP TONES
This section helps you identify the meanings of beep tones.
Beep tones Meanings
Two seconds tone Printer detects an error condition.
Turn off the power switch and turn it on again.
Long tone, once Printer detects an error condition.
Turn off the power switch and turn it on again.
Two long tone Bail lever is closed before the paper goes through
sequence, two times the location of the bail lever.
Open the bail lever to pass the paper under the
bail lever.
Four short tone Printer is out of paper.
sequence, two times
Short tone, once • Buffer is cleared.
• Top of form is set.
• Quiet mode is selected.
• EDS mode is selected.
Short tone, twice • Macro definition is selected.
• Quiet mode is cancelled.
Short tone, triple • Macro definition is cancelled.
• Printer is reset.
One-quarter tone • Hexadecimal mode is selected.
• Pitch lock mode is selected.
• Font lock mode is selected.
One-quarter tone, twice Pitch and Font lock mode is selected at a time.
Intermittent tone Release lever is moved while the paper is in printing
position.