Service manual

Save Macro Definition

You can save the current settings to the printer for later use with the following

procedure:

1. Press the ON LINE button to set the printer off-line.

2. Press the FONT button and hold it down.

3. While holding the FONT button down, press the PITCH button and hold

them down.

4. Release both buttons at the same time after two beep tones to save the

current setting. If you release these buttons after three beep tones, the

macro has been cleared.

NOTE:You can store the following settings with this procedure.

• Current Font

• Current Pitch

• Current auto-loading amount for cut forms

• Current auto-loading amount for fanfold forms

• Current auto-loading amount in ASF mode