Service manual

33
2. The printer will feed the paper forwards and backwards during this
operation, allowing you to view the paper for optimum alignment.
3. To adjust the printing, use the PITCH and PAPER FEED buttons.
The PITCH button will move the second pass to the left. The PAPER
FEED button will move the second pass to the right.
4. When the two passes are aligned with each other to form one continuous
line, the bi-directional alighnment test is completed.
5. To change the mode for which the bi-directional adjustment is performed,
press the ON LINE button. This will cycle between “LQ”, “DRAFT”,
“DRAFT COND”, “GRAPHICS A” and “GRAPHICS B”.
Repeat the process for all print modes.
6. To exit from this mode, press the FONT button.