Service manual

29
PITCH
This button allows you to select the printing pitch. Remember that the printer
must be off-line for you to do this. Successive presses of this button will
illuminate (and select) the following options in order:
FONT
This button selects the font to be printed. Draft font is selected at power-up
unless the default settings are changed. To change the font, set the printer
off-line, then press the FONT button repeatedly until the indicators beside
the desired selection illuminate. The selections cycle in the following order:
Pitch Indicator(s)
Pica (10 CPI) 10 CPI
Elite (12 CPI) 10 CPI, 15 CPI
Semi-condensed (15 CPI) 15 CPI
Condensed pica (17 CPI) 10 CPI, COND
Condensed elite (20 CPI) 10 CPI, 15 CPI, COND
Proportional PROP
Condensed proportional PROP, COND
Font Indicator(s)
Draft DRAFT
Roman ROMAN
Sanserif ROMAN, COUROER
Courier COURIER
Prestige COURIER, SCRIPT
Script SCRIPT
When this switch is pressed in on-line, the printer indicates the current status
as shown below:
Status Indicator
Font lock mode DRAFT
Pitch lock mode ROMAN
Macro definition COURIER
Compressed Data mode SCRIPT