Service manual

9
SETTING UP
Place the printer in the desired location, and remove all packing material
from the printer. This packing material is intended to prevent damage to the
printer while in transit.
You will want to keep all the packing material, along with the printer carton,
in case you have to move the printer to a new location.
Installing the platen knob
The platen knob is packed into a recess of the cardboard packing material
which held your printer inside the carton. Be sure to remove the knob from
the packaging.
Align the knob on the platen shaft, which is located on the right-hand side of
the printer. Rotate the knob on the shaft before pushing the knob fully into
position.
Figure 2-2. Installing the platen knob.