Service manual

113
International character sets
When an international character set is selected by a command from software,
the following changes are made in the Italic character set:
The command for selecting the international character set is:
<ESC> “R” n
Where n means character code n, i. e. CHR$(n) in BASIC. The values of n are:
0 U.S.A. 6 Italy 12 Latin America
1 France 7 Spain I 13 Korea
2 Germany 8 Japan 14 Irish
3 England 9 Norway 64 Legal
4 Denmark I 10 Denmark II
5 Sweden 11 Spain II