Service manual

Running the SETUP Program
Defining Your Own Drive Type
If the parameters for the hard disk (listed in its documentation) do not match any of the types
listed in Appendix A, you can define your own type. Follow these steps:
1
Highlight the Hard disk 1: or Hard disk 2 : option, and press Enter.
2
Use the numeric keys along the top of the keyboard or the numeric keypad to enter the
appropriate values for these parameters:
Enter number of cylindera on disk
Enter number of cylinder heads
Enter number of sectors per track
The total amount of storage capacity on the disk is calculated by SETUP automatically
based on the other values entered.
Press Enter after typing each number. If you enter an invalid number, the computer
beeps and does not go on to the next parameter.
Check the drive documentation and
try again.
B-12 Epson NX Service Manual