Service manual
System Utilities
Setting the Password
The default setting is Not set. To set a password press
Enter.
You
see
the
message
below on the help line:
<F2> sets password
Note Change the settingsof Password security and/or Network server
security from Disabled to Enabled before setting a password.
Press F2 and you see the prompt Enter Power on Password. Type in your
password and press
Enter.
The Password option setting changes to Set.
Note
If someone has set a password, you may need to move jumper
J13 from the B position
(enabled) to the A position (disabled) to access the computer.
Installed Diskette Drive(s)
SETUP automatically detects the number and type of diskette drives in the system as shown
in the Diskette Drives option. The options are:
P
Not installed
cl
360KB 5.25”
cl
720KB 3.5”
cl
1.2MB 5.25”
P
1.4MB 3.5”.
Installed Hard Disk Drive(s)
SETUP lets you select the type of hard disk drive(s) installed in the computer. Follow these
guidelines to choose the correct setting for each drive:
cl
If the system does not have a hard drive, select
Not
installed for drives 1 and
2. If one hard disk drive is installed, select Not installed for drive 2.
cl
If a Conner 170MB hard disk drive is installed as drive 1, select type 26.
0
If a Quantum 240MB hard disk drive is installed as drive 1, select type 34.
ci
If
a Quantum 525MB SCSI
drive
is installed as
drive
1, select
Not
installed.
cl
If another type of hard disk drive is installed, select the drive type that matches the
drive. See “Hard Disk Drive Types” below.
Hard Disk Drive Types
The table in Appendix A lists the types of standard hard disk drives that can be installed in
the computer. Check this table and the documentation that is supplied with the hard disk
drive to determine the correct type number for the drive. If none of the drive types listed
matches the drive, see “Defining Drive Type" below.
Note
The SETUP program Hard Drive options do not list the Precomp or Landing
zone parameters for the hard drive types. These parameters are included in the table in
Appendix A.
Epson
NX Service
Manual
B-11