Service manual
Running
the SENTUP Promgram
Setting the Keyboard Options
There are four keyboard options available:
0
Keyboard function
0
Keyboard delay
cl
Keyboard speed
0
Num Lock status after boot.
The
Keyboard
function must he set to its default setting (Enabled) to change the
delay and speed setting. The Num Lock status
after boot
setting can he
changed anytime.
The Keyboard delay default setting is 250 ms, or ΒΌ second The options are 0,
250, 500, 750,
or 1000 milliseconds (ms).
The Keyboard speed default setting is 020 kps (keys per second). The options are
any speed between
002
and 031 kps.
The Num Lock status after boot default setting is ON. The option is
OFF.
Installed Equipment
Setup displays information about the following equipment (except for math coprocessor,
these fields are non-editable):
Number of diskette drives
0
Video type
cl
Math coprocessor.
B-8
Epson
NX Service
Manual