Instruction manual

MFJ-1289 Multicom User's Manual Page 64
Your picture will be transmitted in the format in which it was
received.
R Initializes the automatic SSTV start of receive operation. To
begin receiving a picture, press <Space> to toggle the picture
reception on or off. After you have received the picture, press
<Space> again to stop the picture reception mode. Enter the
drive and pathname to which you want to save the picture, and
press <Enter> .
V brings up the current selected directory. Use the highlighted
arrow keys to select a slow-scan picture, press <Enter> , and
the picture will be displayed on your screen. If the picture is
longer than your screen allows (and many are), press any key
and the picture will scroll. You may move between directories
the same as using the <F7> key in the terminal screen.
<Esc> exits the SSTV mode, returns to the terminal screen.
To experiment with SSTV modes, try 14.230 and 14.233 MHz. There are other
frequencies set aside for this purpose, but these two frequencies will help you
become familiar with the SSTV features.
Pictures may be printed using the PRINTPIX.EXE program, which is supplied
with the utility programs and documented separately in this manual.
You should name the files, as they are saved, in an easily-remembered form.
Using the file extensions .SC1, .SC2, .T72, .M1C, etc. makes it much easier for
you to recognize these pictures from a directory listing.