Instruction manual

MFJ-1289 Multicom User's Manual Page 60
At any time during a FAX receive you can press <Esc> to interrupt the receive.
Multicom will ask if you want to save the image. If you press "Y" it will ask for a
filename. If you press "N" you will drop back into the FAX main menu.
If you have the "Auto end of FAX" enabled Multicom will ask if you want to save
the image. If you select "N" Multicom will clear the buffer and the image will be
lost. If you select "Y" Multicom will ask for a filename and then drop back into
the main FAX menu. The image will be saved in the buffer until Multicom
receives the start tones from the next FAX.
If you do not have the "Auto end of FAX" set you must press <Esc> to end a
FAX. Multicom will then treat the file the same as if you interrupted a FAX
receive.
After you have saved a FAX you can view it by pressing <F5>. You can also
give the FAX false colours, straigten the FAX and combine the three elements of
a colour FAX. See the section on image processing.
Transmitting FAX
Remember: Amateur FAX transmission must be within the F.C.C. allocated
frequencies for image tranmission.
Before you attempt to transmit FAX you must have something to transmit. Any
PCX file, 256 color, of 320 x 200 pixels can be transmitted by Multicom 3.1 . Use
any graphics program that is commercially avilable to capture, edit, and size an
image. See the section on Image Processing.