Instruction manual

MFJ-1289 Multicom User's Manual Page 55
Multi Level FAX Mode;
Multicom version 3.1 has a new menu driven FAX module. To run the FAX
module you will need EGA or VGA. Multicom can now recieve and transmit 7
FAX modes. It will receive wire photographs in three, color separations and
combine them into a color PCX. It will also seperate a color PCX into three,
seperate grey scale FAX; cyan, magenta and yellow; and transmit them to
another amateur station.
From the terminal press <F4> to enter the FAX module. The FAX screen will
appear as below:
From this screen you can receive and transmit FAX, set one of ten autotimers,
view FAX files on disk, save the buffer to disk, load a PCX (FAX) from disk,
display the current FAX in memory, or configure each of the FAX modes.