Instruction manual

MFJ-1289 Multicom User's Manual Page 40
Selecting Function Buffers to Use;
When Multicom is loaded, only the following function buffers are shown at the top
of your screen (available for use):
PACKET.FUN
AMTOR.FUN
RTTY.FUN
ASCII.FUN
CW.FUN
NAVTEX.FUN
PACTOR.FUN
KEYER.FUN
MULTICOM.FUN
You can choose from a list of other available function buffers by pressing <Alt>
+F. Select a buffer to use (for instance, the RTYCNTST.FUN we created
earlier) by using the cursor keys to highlight it, then press <Enter> and that
function buffer will be currently active when you press <F6> (as shown below).
Note: whichever function buffer is loaded with <Alt> +F becomes the user
buffer or <F6> key.