User's Guide

Solving Remote Control Problems 71
The colors on the screen don’t look right.
■ Press the Color Mode button on the remote control to select a different color mode (see
page 39).
■ Check the brightness and contrast (see page 43).
■ Fine-tune the colors with the settings listed on page 44.
■ If the picture looks dark, you may need to replace the lamp. Check the lamp usage timer
to see how long the lamp has been in use (see page 64). Replace the lamp if it’s close to
the end of its service life (see page 61).
I can’t find content on my iPod.
■ The Videos menu will only play videos from your device that were imported into iTunes.
To play videos that were not imported into iTunes, press on the remote control to
switch control to the device. Use the touch screen or controls on the device to navigate to
the Photos icon on your device. Select the video you wish to project and press play.
Solving Remote Control Problems
The projector doesn’t respond to remote control commands.
■ Make sure you’re within about 20 feet (6 m) of the projector, and the remote control is
aimed at the projector’s front or back sensor within the ranges shown below.
■ You may need to replace the remote control batteries (see page 17). Press the
illumination button and check if the playback and volume buttons glow. If they don’t,
replace the batteries.