Specifications

M L C 1 0 4 I P P L U S
Introduction
Extron MediaLink is a family of economical
easy-to-install and easy-to-use products that
work together to connect, control, and switch
A/V presentation equipment in small classrooms
and conference rooms. All MediaLink Controllers,
MediaLink Switchers, and accessories are
designed to simplify installation and operation
of presentation systems. The complexity often
associated with A/V integration is replaced with
standardized and simple one-touch functionality
that provides a complete system solution.
Centralized Room Control
Extron’s MediaLink Controllers simplify system
management and monitoring by centralizing
all of the control elements of a complete
A/V system.
MediaLink Controllers are compatible with a
variety of projectors and displays and eliminate
the learning curve often associated with operating
complicated control systems. These self-
contained controllers consolidate functionality
and control of all connected A/V and room
devices into one, easy-to-use system. There
are no complicated remotes to lose or worry
about, no batteries to wear out, and no confusing
menus to memorize. In facilities where brands
and types of projectors, DVD players, and VCRs
may vary from room to room, controlling the A/V
system with a MediaLink Controller is always the
same no matter where it is installed, enabling a
user to walk in and begin a presentation without
uncertainty or delay.
MediaLink System Configuring
Configuring the MediaLink System is simple and
intuitive using Extron’s free software. There’s no
need for intricate programming, special codes,
scripts, or proprietary languages. MediaLink
configuration is as easy as navigating through
a graphical user interface and making the
appropriate selections to suit the needs of the
application.
IP Link
®
Remote Monitoring and Control
Extron IP Link technology is a key feature
of two MediaLink Controller models, the
MLC 104 IP Plus and MLC 226 IP. Extron’s Free
GlobalViewer
™
Web-based application, enables
you to remotely control and monitor MediaLink
Controllers, attached projectors, and other
connected A/V devices from any computer on
your network. It can be used to simplify and
automate resource management and technical
support tasks, such as turning displays on and
off, reporting lamp hours, and sending theft
alerts. Altogether, IP Link and GlobalViewer
provide a cost-effective means of centralizing
A/V system management and monitoring, thus
enabling a higher level of A/V system support
that reduces demands on personnel.