Operating instructions

SIS
™
Programming and Control, cont’d
MLC 104 Plus Series • SIS Programming and Control
4-14
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII (Telnet)
(host to MLC)
URL Encoded (Web) (host to MLC)
Response (MLC to host)
Additional description
IR/serial data port
Send an IR command
28
E
X21%
,
X5&
,
X5*
,
X5(
IR
}
Send an IR command via IR/Serial Output port number
X21%
(1 = display port).
X5&
= the IR file number (0-99),
X5*
= IR
function number (1-137),
X5(
= IR playback
mode (0 = play once, 1 = play continuously, 2 = stop). The response includes leading zeros.
W
X21%
%2C
X5&
%2C
X5*
%2C
X5(
IR
|
Irs
X21%
,
X5&
,
X5*
,
X5(
]
Get IR command info
13, 28
E X5&
,
X5*
IR
}
W
X5&
%2C
X5*
IR
|
{descriptive text}
]
The response to this command is the name/ description (e.g., Power On, Power Off, Enter, Play, Stop, RGB, Menu) of the specific command you ask about. X5&
= the IR file number (0-99), as in files
1.eir, 2.eir, 3.eir, etc. stored in the controller.
Each___.eirlecontainscommandsfora specific device. X5*
= IR playback function number (1-137),
which corresponds to a specific function/ command set contained within the file. IR function numbers 0 and 127 or higher can return information only. 0 = return all data 129 = manufacturer 130 = model 131 = class 132 = remote 133 = creation date 134 = comments 137 = user file name (a descriptive name the user/installer gave the file)
Example:
E
3,1IR
}
W3%2C1IR
|
POWER
]
Command/function 1 in file 3.eir is the Power command.
Example:
E
3,2IR
}
W3%2C2IR
|
E13
]
Command/function 2 in file 3.eir is not defined or does not exist, so the controller returns E13, the invalid value error number.
N
An IR driver must be loaded into the MLC before IR command information can be read.