Operating instructions

Software-based Conﬁguration and Control, cont’d

MLC 104 Plus Series • Software-based Conguration and Control

3-18

PRELIMINARY

System Settings

This is for IP, date/time, and executive mode (front panel lockout) setting changes.

Unit Name is any name (e.g., Room108MLC104IPplus, Lab1234mlc104 IP,

ConfRoomSystem, LectureHall8‑cntrlr) you use to label this speciﬁc MLC. The

default is a combination of the product name and part of the hardware address.

This can be changed to your choice of alphanumeric characters and hyphens (‑).

• Spaces()andunderscores(_)arenotpermittedwithinaunit’sname.

• ValidcharactersareA-Z,a-z,0-9,and-(hyphen).

• Thenamecannotstartwithanumberorhyphen.Itcannotendwithahyphen.

• Maximumlengthis24characters.

Passwords

In the Passwords page you can change the administrator and/or user passwords.

Passwords must contain 4 to 12 alphanumeric characters. Symbols and

spaces are not allowed, and the passwords are case sensitive. A minimum of 4

characters are required when creating passwords via the Web pages.