Operating instructions

SIS
™
Programming and Control, cont’d
MLC 104 Plus Series • SIS Programming and Control
4-36
PRELIMINARY
Command/response table for special function SIS commands, continued
Command ASCII
Command
(host to MLC)
Response
(MLC to host)
X?
values
and additional descriptions
Each control module (IRCM, ACM, RCM, CM) has 20 memory blocks reserved for it, no matter how many buttons are
physically present on the module:
•module1:blocks26-45
•module2:blocks46-65
•module3:blocks66-85
•module4:blocks86-105
N
MLC 104 Plus Series units can be connected to a maximum of four control modules. See page 2‑12 for cabling
instructions.
Memory block numbers for each module are sequential from left to right, top row to bottom row, as shown below.
SCREEN POSITION
DOWN UPSTOP
DVD & VCR CONTROL
PLAY NEXT/FWD PAUSE STOP
TUNER
Tx
PREV/REW
ENTER
TITLE MENU
TV/VCR
DVD VCR
DVD & VCR CONTROL
PLAY NEXT/FWD PAUSE STOP
TUNER
Tx
PREV/REW
ENTER
TITLE MENU
TV/VCR
DVD VCR
CM-3BLB
CM-3BLB
CM-9BLB
CM-3BLB, DIP switch set for address 3 (module 4)
Button/Switch Memory Block Numbering for Control Modules (IRCMs, ACMs, RCMs, CMs)
Memory Block Numbering
for Any Control Module
with Black Buttons
(Example is for Control Module 1)
Memory Block Numbering
for Control Modules with
Clear, Backlit Buttons
26 27 28 29 30
26 27 28
35
30
40
45
31 35343332
36 40393837
41 45444342
26 27 28
86 87 88
26 27 28
29 30 31
32 33 34
Memory Block Numbering Examples
for Modules with Black Buttons
DVD Half (module 1)
IRCM-DV+ with DIP switch set for addresses 0 and 1 (modules 1 and 2)
RCM-SC with DIP switch set for address 2 (module 3)
VCR Half (module 2)
31 353332
36 39
29
37
41 45444342
66
66 68 70
71
76 77 78 79
67 69
82 83 84
80
81 85
72 73 74 75
26 28 30
31
36 37 38 39
27 29
42 43 44
40
41 45
32 33 34 35
7068
51 555352
56 59
49
57
61 65646362
Module 3 has
memory blocks 66-85.
Module 1 has
memory blocks 26-45.
46 48 50
51
56 57 58 59
47 49
62 63 64
60
61 65
52 53 54 55
Module 2 has
memory blocks 46-65.
Module 4
has memory
blocks
86-105.
Buttons and memory blocks are
numbered in a grid of 5 columns
and 4 rows of buttons on each
module, as on the CM-20BB,
shown above.
Backlit button modules feature a grid
of 3 columns and 1 or 3 rows of
buttons, as shown at left.
N There are still 20 memory
blocks for each module.
• Module 1: memory blocks 26-45.
• Module 2: memory blocks 46-65.
• Module 3: memory blocks 66-85.
• Module 4: memory blocks 86-105.
CM-3BLB
CM-9BLB
86 87 88
89 90 91
92 93 94
• • •
• • •
• • •
104 105 —