Specifications

LQ-1070+
Non-recommended Commands
Information Reference List
Epson recommends against using the following commands because
some of these commands are not supported in existing printers and
some are duplicates of other commands.
Engineering Change Notices
BEL
B=per
Bs
Backspace
DC1
Select printer
CAN
ESC#
Esc<
Esc=
Esc>
ESC?
ESCA
ESCK
ESCL
ESCY
Deselect printer
Cancel data
Cancel MSB control
UnidirectionaI printing for one Iine
SetMSBtoO
SetMSBtol
Reassign bit-image mode
Select n/&%inch line spacing
Select 8-dot, single-density, bit-image printing
Select 8dot, double-density, bit-image printing
Select 8dot, double-speed, double-density, bit-image
printins
Escz
DEL
Select quadruple-density bit-image printing
Delete character
None.
Product Support Bulletins
None.
Technical Information Bulletins
None.
Related Documentation
LQ107O+ADD LQ-570/1070 and LQ570+/1070+,
ActionPrinter 5000/5500 and
ActionPrinter 5000+ Service Manual
PL-LQ1070+
SI’KLQ1070+
4002064
LQ-1070-k Parts Price List
LQ-1070+ SeIf Paced Kit
LQ-57O+/LQ-107% User’s Guide
Installation/Support Tips
Most application programs let you specify the type of printer you use
so that the program can take full advantage of the printer’s features.
Many of these programs provide an installation or setup section that
presents a list of printers.
Choosing from a menu
To take full advantage of your printer’s features, including ESC/P 2,
choose the LQ570+/1070+ or Stylus 800/1000 from the menu. If
these printers are not listed, contact the software manufacturer to see
if an update to the software is available. Until you receive an update,
choose from the following list:
ActionPrinter 5000+
ActionPrinter 5000
LQ-570/1070
LQ-870/1170
LQ-100
SQ-870/1170
LQ-510/550
LQ-500
LQ-86O/LQ-1060
LQ-85O/LQ-1050
LQ-2550
If none of these printers is listed, select the first one available from
the following list:
EX, FX, LX, RX, MS, Epson printer, Standard printer, Draft printer
To use all the features of your printer, however, it is best to choose a
program with your printer on its menu. If your program does not list
this printer, contact the manufacturer of the software to see if an
update is available.
24-Pin Printers
7/20/93
LQ-1070+ - 7