Specifications

LQ-1070+
Paper:
Interface timing
The figure below shows the timing for the parallel interface:
-==#=zk
ACKNLG
Interface Cards
You can use optional interface boards to supplement your printer’s
built-in parallel interface.
The Epson interfaces below are compatible with your printer:
Model Number Name
C823051
Serial interface card
C823071
32 KB serial interface card
C823101
MACLQ
32 KB parallel interface card
Eoson Talk interface card
Option Specifications
Cut-sheet feeders
Dimensions and weight
Printer
Cut+hest feeder Height
Width Depth
Weight
LQ- 1070+
Single-bin 377 mm 60Qmm
444mm
0.75 kg
C806391
(14.8 inches) (24.0 inches)
(17.5 inches) (1.65 lb)
L&1070+
Hlgh-capactty
367 mm 60Qmm 434mm
2.15kg
C806401
(14.4 inches) (24.0 inches)
(17.1 inches) (4.74 lb)
Note: Dimensions when mounted on the printer; includes printer
dimensions
Bin capacity
Single sheets: c806391
Up to 50 sheets of 82-g/m* (22-lb) paper
C806401
Envelopes:
Up to 150 sheets of 82-g/m* (22-lb) paper
C806401
Up to 25 (plain bond)
Up to 30 (air mail)
single sheets
Envelopes
Width C806391 182 to 420 mm N/A
(7.17 to 16.5 inches)
C806401 182 to 420 mm 165 to 241 mm
(7.1710 16.5 inches) (6.50 to 9.49 inches)
Length 210 to 305 mm 92tolO4mm
(8.27 to 12.00 inches)
(3.62 to 4.09 inches)
Thickness 0.07 to 0.10 mm 0.16to0.52mm
(0.0028 to 0.0039 inches) (0.0063 to 0.0205 inches)
Weight 64t082dm2 45 to 91 g/m2
1 (I 7 to 22-lbs)
I(12 to 24-lbs)
I
Paper storage conditions:
Temperature: 18” to 22°C (64’ to 72OF)
Humidity: 40% to 60%
Environmental
Temperature:
Operation: 5” to 35°C (41” to 95°F)
Storage: 30” to 60°C (-22” to 140°F)
Humidity (without condensation):
Operation: 15% to 80%
Storage: 5% to 90%
Note:
l 9&g/m* paper printing is only available at normal operating
conditions.
l Envelope printing is only available with the C806381 cut-sheet
feeder, at normal operating conditions.
Command Changes from ESC/P
New Commands
The following are new comman
ds that have been added to the
ESC/P command set:
EsC(C
ESC(G
=tu
=tv
Et”
=3C
=(t
=(v
Est.
ESC X
ESC C
Set page length in defined unit
Select graphics mode
Define unit
Set absolute vertical print position
Print data as characters
Set page format
Assign character table
Set relative vertical print position
Print raster graphics
Select font by pitch and point
Set horizontal motion index (HMI)
Deleted Commands
The following commands are not supported on Epson ESC/P 2
printers:
ESCb
Set vertical tabs in VFU channels
Esc/
Select vertical tab channel
ESCa
Select justification
LQ-1070+ - 6
7/20/93
24-Pin Printers