Service manual

EPSON LX-300+ Revision A
Maintenance Maintenance 91
Figure 6-5. PF Roller Assembly
Figure 6-6. Paper Guide Assembly
Figure 6-7. Tractor Assembly
Figure 6-8. Oil Pad
Lubricate G-26 to the shaft of the
drive PF roller and the rear driven
PF roller. (4 places)
PF roller assembly:
G-26, 1/2 grain of rice
Drive PF roller
Rear driven PF roller
Set the paper guide assembly
upside down and lubricate at the
touching part of the PF roller
assembly with the release shaft.
(4 places)
Paper guide assembly:
G-26, 1 grain of rice
Release shaft
Paper guide assy.
Lubricate G-26 into the hole of the
right TR (tractor) frame facing to
the TR guide shaft and the left TR
frame.
Tractor assembly:
G-26, 1/2 grain of rice
The picture at the left is the back
of the printhead.
1. Set the oil dispenser 0.30ml.
2. Lubricate O-2 on the Oil pad.
Oil pad:
O-2, 0.28-0.32 cc
Note: Make sure that the setting of
the oil dispenser is correct.
Oil Pad