Service manual

EPSON LX-300+ Revision A
Disassembly and Assembly Disassembly and Assembly 78
4.2.7.8 PG Sensor Removal
1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism
Removal".)
2. Release 2 hooks of the PG sensor securing it to the left frame with
tweezers and remove the sensor.
3. Remove the harness from the sensor (white).
Figure4-18. PG Sensor Removal
4.2.7.9 Release Lever Position Sensor Removal
1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism
Removal".)
2. Release 2 hooks of the release lever position sensor securing it to the
right frame with tweezers and remove the sensor.
3. Remove the harness from the sensor (blue).
Figure4-19. Release Lever Position Sensor Removal
Left frame
PG sensor (white)
Hook
CAUTION
When installing the release lever position sensor, be sure to
insert it between the release lever and the right frame.
Release lever position sensor (blue)