Service manual

EPSON LX-300+ Revision A

Disassembly and Assembly Disassembly and Assembly 76

Figure4-14. Hook at the PG Adjust Lever

7. Remove the carriage unit along with the CR guide shaft and PG adjust

lever from the printer mechanism.

4.2.7.4 Ribbon Feed Mechanism Removal

1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism

Removal".)

2. Remove the tension spring, 8.10 from the motor bracket and release the

tension of the timing belt. (See 4.2.7.1 "CR Motor Assembly Removal".)

3. Release 3 hooks securing the RD cover to the left frame.

4. Remove the RD cover.

Figure4-15. Ribbon Feed Mechanism Removal

ADJUSTM ENT

REQUIRED

When the carriage unit is replaced, perform Bi-D adjustment.

PG Adjust Lever -- Hook

Left frame

Driven pulley assy.

RD ratchet

Gear, 13.2

Base frame

RD cover

Planetary lever assy.

Timing belt

Combination gear, 51, 16.2

Timing belt