Service manual

EPSON LX-300+ Revision A

Disassembly and Assembly Disassembly and Assembly 69

4.2.2 Upper Housing Removal

1. Remove platen knob, cover assembly, printer, tractor unit and paper eject

unit. Remove the color upgrade kit if it is installed.

2. Set the release lever to the tractor feed.

3. Remove 4 screws (CBP, 3x10) securing the upper housing to the lower

housing.

4. Remove the upper housing.

Figure4-2. Upper Housing Removal

Upper Housing

CPB (3x10)

CHECK

PO INT

When installing the upper housing, be sure to insert

LEDs on the panel board to the LED holes of the upper

housing.

Upper Housing

LED

Panel Board Assembly