Service manual

LX-300+ Revision A
Product Description Operation 27
3. Press Tear Off button.
The current setting and the “Usage of this mode” by selected language
will be printed on the paper set in the paper path at that time.
A print sample is shown in appendix A.
4. Select Menu by Tear Off button.
Font LEDs show the menu which is selected at that time. The selection
will be advanced one by one as the button is pressed and the
combination of those three LEDs status of On/Off/Blink/2-Blinks will be
changed according to the selection.
5. Select setting value by LF/FF button.
Tear Off/ Bin LEDs and Paper Out LED show that menu’s value by status
of On/Off/Blink/2-Blinks. That value can be changed by pressing Tear Off/
Bin button and the LEDs status of On/Off/Blink/2-Blinks will be changed as
the button is pressed.
6. When LF/FF button is pressed, the printer memorize the last setting value.
7. Repeat (4) to (6).
The other items can be changed in the same manner.
The menu selection will return to the first menu after the last menu
selection is over.
8. Turn the printer off.
The setting is stored into non-volatile memory.
Table 1-21. Setting Menu
Item Setting / Value *2
Page length for tractor
3 inch, 3.5 inch, 4 inch, 5.5 inch, 6 inch, 7 inch,
8 inch, 8.5 inch, 11 inch
, 70/6 inch, 12 inch, 14 inch,
17 inch
Skip over perforation OFF, ON
Auto tear off OFF, ON
Auto line feed OFF, ON
Print direction Bi-d., Uni-d., Auto
Software ESC/P2, IBM 2390 Plus
0 slash OFF, ON
High speed draft OFF, ON
I/F mode Auto, Parallel, Option
Auto I/F wait time 10 seconds, 30 seconds
Parallel I/F bidirectional
mode
OFF, ON
Packet mode Auto, OFF
Auto CR (IBM 2390 Plus) OFF, ON
A.G.M. (IBM 2390 Plus) OFF, ON
Character table Software version
Italic, PC437
, PC850, PC860, PC863, PC865, PC861,
BARASCII, Abicomp, Roman8, ISO Latin 1, PC858,
ISO 8859-15
NLSP version
Italic, PC437
, PC850, PC437, Greek, PC853, PC855,
PC852, PC857, PC864, PC866, PC869, MAZOWIA,
Code MJK, ISO 8859-7, ISO Latin 1T, Bulgaria,
PC774, Estonia, ISO 8859-2, PC 866 LAT., PC
866UKR, PC APTEC, PC708, PC720, PCAR 864,
PC860, PC865, PC861, PC863, BRASCII, Abicomp,
Roman8, ISO Latin 1, PC858, ISO 8859-15, PC771
International character set
for Italic table
Italic U.S.A.
, Italic France, Italic Germany, Italic,
U.K., Italic Denmark 1, Italic Sweden, Italic Italy,
Italic Spain 1
Manual feed wait time 1 second, 1.5 seconds, 2 seconds, 3 seconds
Buzzer OFF, ON
Auto CR (IBM 2380 Plus)
*1
OFF, ON
IBM character table
*1
Table2, Table1
NOTE: *1: This setting is effective when IBM 2380 Plus emulation is
selected.
NOTE: Setting with underline mean the standard factory settings.
Table 1-21. Setting Menu
Item Setting / Value *2